Imprinted Concrete Sealing Broom (10 Inch)
(Broom for life) After Use DO NOT try to clean. Simply SOAK IN SEALER to soften before using again. Fits directly into drum for easy application. Fits directly into drum for easy application of sealer-
Imprinted Concrete Sealing Broom for Driveways and Patios 10" soft broom for sealing pattern imprinted concrete (supplied with handle). Allows application of sealer directly from drum. Prior to use pull on broom hairs and work over hard surface to remove any loose ones. Can be re-used at anytime in future, allow to dry naturally, broom hairs will harden once dry. Prior to re-use submerge in sealer for 10 minutes, hairs will soften, allowing re-usage.
*See technical section below for full instructions and tips prior to use.
Once purchased, you will only require one sealing broom, but 1st time it is used, often like any natural hair broom, it will shed hair.
Application by plastic hair broom or roller is not advised, use of roller will tend to leave excess sealer in the joints, which can create problems.
Please follow instructions below prior to use.
1. Prior to using rub broom head on abrasive surface and pull out loose hairs.
2. During use, if you are using Colour Tint or Anti Slip Additive, stir reguarly and let broom 'hit' bottom of drum, to keep additives suspended.
3. After use, do not attempt to clean broom, just leave to dry.
4. When you are ready to use broom again, whether it is 1 day, 3 months or 5 years, just leave immersed in sealer for 5 minutes, it will soften up again and be ready for use.
It is that simple, the broom works great for applying imprinted concrete sealer, enabling you to use the product sparingly and not leaving any excess in the joints.
In summary, your sealing broom will literally last forever, you just need to get rid of any loose hairs, prior to use. If a few hairs still get stuck in the surface, do not worry, they will soon be released as the initial 'tackiness' of the sealer diminishes.
Q: Hi I am shortly going to place an order with you as I am going to seal my imprinted concrete drive and your products and customer service are second to none. One quick question what is the best way to stop bristles from your broom fallen out when sealing the drive! Kind Regards Keith
A: Although you can never guarantee any bristles will detach from the broom, we always recommend giving it a good brush with your hand to ensure as many loose haies as possible come out prior to use.
Q: Are the bristles soft coco.
A: Our sealing broom bristles are made from Gumati, but a coco hair broom is also suitable. Hope that helps.
Q: Over the years using mat sealer I have always used a 12inch roller on my compressed concrete I have never used a brush is a brush what you recommend thanks
A: We recommend a sealing broom or paint brush for small areas, this is to avoid leaving any sealer in the joints, this can cause bubbling and waste of product. Hope that helps.
Brilliant product. the imprinted concrete sealer and broom, did the job spectacularly well.
Tried this sealing broom fit's into drum cannot comment on reuse until the next time
The broom did the job, but I think it could be better quality. There was loose bristles dried up on the concrete after applying the sealer onto the surface. Apart from this the broom gets well into the imprinted concrete. My driveway looks nice now. Thanks again.