BRICK / MASONRY Sealer - Breathable, DRY 'Invisible Finish' Protects 10yrs+
Highly Water Resistant Impregnating Sealer Safe & Easy to Apply
Brick and Masonry Sealer for Concrete Walls. Makes brickwork and masonry water resistant and protects from damp
Smartseal Brick Sealer is a high quality, clear, solvent free, breathable, impregnating coating system. Application of the brick sealer will alter the chemical structure of any brick or masonry surface providing a excellent water repellent and stain resistant surface.
- One coat application
- 1 x 25 litre will treat up to 125 m2
- Highly resistant to water, staining and organic growth
- Will not change appearance of surface
- Average coverage 5 m2 per litre
- Application by roller or sprayer
- Allows Walls to breathe
- Touch dry 2-3 hours
- Water resistant within 24 hours
- Lifespan 10 - 15 years
- Suitable for brickwork, masonry, cement, concrete, walls and facades
- Suitable for use over K Rend or Monocouche render systems
- Can be used externally or internally
Suitable for bricks, masonry and facades and protects against water ingress into brickwork and soiling. Surfaces treated with Smartseal impregnating brick sealer will remain cleaner and drier, reducing deterioration and cleaning costs.
- Oil and Water Repellent
- Prevents Organic Growth
- Stain and Dirt Resistant
- Solvent Free
COVERAGE:
For best results, apply generously allowing complete saturation. On most types of brickwork, coverage of around 5m² per litre is to be expected. On stone walls and specialist bricks, coverage up to 10m² per litre can be expected.
RECOMMENDATIONS:
Store sealed in a cool place away from direct sunlight. Once opened, use entire contents as soon as possible.
Do not apply at temperatures below 8°C.
APPLICATION:
Apply by sprayer, roller or paint brush. Once fully cured, the wall, brick, stone or masonry will have a clear dry/invisible finish.
HEALTH & SAFETY:
Wear appropriate safety wear at all times. Technical data sheets and additional technical information is available upon request.
REACH Compliant Water-Based Protective Solution
Q: You say it cannot be used on painted surfaces but where the finish is breathable limewash, which is a water based breathable product, would the same apply. Thank you.
A: To be effective, the brick sealer has to be able to penetrate into the surface of the brickwork or masonry it is being applied to. We would suggest using a sample to carry out a test to see if the brick sealer meets your expectations after being applied to the limewash.
Q: Can this be used on brick that will be covered with soil?
A: Yes, make sure the wall is dry before applying the brick sealer. It will then be beneficial by reducing the moisture penetration into the brick. Hope that helps.
Q: Do you need to do this in summer when walls are totally dry or can it be done even in winter
A: If the brick wall looks dry and the air temperature is above around 12 degrees you can apply the brick sealer. Hope that helps.
First time I have used this product. Easy to apply. However I did use a lot more than it says I would have needed. Maybe due to porous bricks though. Tested for water resistance after it had dried and definitely makes a big difference. Water runs straight off. Happy with the product and so was my customer. Would use again
excellent performance. Highly recommend the brick sealer. Please use spray gun.
I have a new build house with a single skin garage it was fine in the summer, but the walls were quite damp in the winter resulting in a somewhat wet garage. I spent some time looking at various products before I went with Smartseal, but I'm really pleased with the results of the brick and masonry sealer. Despite driving rain my garage is dry, the product was really easy to spray on and it only took a few hours. I would definitely recommend Smartseal it has saved the contents of my poorly built garage!