Grout Haze Remover to remove grout and cement residue from tiles
Fast, effective grout stain and cement residue remover. Grout cleaner & grout residue remover to remove grout stains caused by mortar & cement on ceramic, porcelain, terracotta, slate & marble tiles.
GROUT HAZE REMOVER & GROUT FILM REMOVER
Smartseal Grout Haze Remover is a fast effective grout and cement residue remover for use on all types of wall and floor tiles. Use Grout Haze Remover to remove stains on wall and floor tiles in bathrooms and kitchens.
Grout can be a difficult to remove once dry and can look unsightly on polished tiles on the wall or floor. Smartseal Grout Haze Remover easily removes residues of grouting compounds such as mortar and cement on ceramic, porcelain, terracotta, slate and marble surfaces. It will also remove any efflorescence that may be present as well as any ingrained dirt and grime. It is also effective as a rust, calcium & limescale deposit remover.
If required, use as a grout residue remover in conjunction with Grout Cleaner and Mould and Mildew Remover.
Smartseal Grout Haze Remover is suitable for use internally and externally. It is important that all surfaces with grout residue being cleaned must be resistant to acids so ceramic, porcelain, brick, clay and quarry tiles are OK. It can also be uses to remove mortar and cement residues from terracotta, concrete and other types of natural stone such as limestone and sandstone.
Once any grout residue or mortar stains have been removed, use Grout Magic to transform the look of grout. Grout Magic can make old shower grout look like newas well as wall and floor grouting in bathrooms and kitchens.
SIZES AVAILABLE:
1 Litre containers with childproof cap
5 Litre containers with childproof cap
PRODUCT FEATURES:
- USE ON SURFACES THAT ARE NOT SENSITIVE TO ACIDS
- QUICK ACTING FORMULATION
- SIMPLE EASY APLICATION
- USE INTERNALLY & EXTERNALLY
COVERAGE RATES:
If the surface is very dirty and contaminated used undiluted. Can be diluted up to 1:10 with water if low levels of grout film are being removed.
Q: Hi, Our builders did not clean off the grout haze when they should have. its been many weeks now and the grout haze is difficult to get off using conventional methods. Will this product remove weeks-old grout haze?
A: it is always hard to say with complete confidence that the grout haze remover will remove all of the grout haze present. This is because there are so many types of grouting polymers used today and some can be much harder to remove than others. The product is formulated for this specific purpose, so hopefully it will work and meet your expectations.
Q: Hi, our builders did not clean off the grout haze when they should have. its been many weeks now and the grout haze is difficult to get off using conventional methods. Will this product remove weeks-old grout haze?
A: It is always hard to say with complete confidence that the grout haze remover will always remove all of the grout haze present. This is because there are so many types of grouting polymers on the market and some are much harder to remove than others. Its a product we normally recommend for this type of use and is formulated for this purpose, so it should have a beneficial effect that hopefully meets your expectations.
Q: Hello - the product says it’s suitable for marble but also says suitable for surfaces which are not affected by acid , which marble is . Could you confirm? We have grout haze on honed marble
A: The product will not adversely affect the marble. We have had issues in the past where people have accidently got some of the product on the kitchen cabinets for example and they have had a reaction to the product. Hope that helps.