pH Neutral Tile & Stone Cleaner (1L & 5L)
Easy to use and very effective at removing surface dirt, dust and grime leaving the surface of the tiles or stone looking clean, fresh and deodorised and free from germs. With a scent of fresh lavender. For use on floor tiles, wall tiles & stone worktop.
pH Neutral Tile & Stone Cleaner
Smartseal pH Neutral Tile & Stone Cleaner is an effective, high quality cleaner for use on floor tiles, wall tiles and stone worktops. It can be used for the cleaning and maintenance of ceramic tiles, porcelain tiles, natural stone, plus glass, vinyl and stone worktops.
The Tile & Stone Cleaner is very easy to use and very effective at removing surface dirt, dust and grime leaving the surface of the tiles or stone looking clean, fresh and deoderised and free from germs. The biodegradable formulation is safe, non-corrosive and can be used on a wide variety of washable surfaces around the home or office.
We recommend using the pH Neutral Tile & Stone Cleaner for cleaning bathrooms, toilets or kitchens plus any other contaminated area that can be quickly wiped down to create a clean fresh, safe environment. It can clean stone tiles or worktops with ease and is safe to use around environments where food is being prepared.
PRODUCT FEATURES
- EFFECTIVE STONE CLEANER AND DISINFECTANT
- EASY TO USE AND APPLY
- BIODEGRADABLE & ECO-FRIENDLY
- NEUTRAL PH - NON CORROSIVE
- NON ACIDIC ALKALINE FORMULATION
- DOES NOT CONTAIN BLEACH
- VERY ECONOMICAL - HIGH CONCENTRATE
- SMELLS OF FRESH LAVENDER
SIZES AVAILABLE:
1 Litre containers with childproof cap
5 Litre containers with childproof cap
COVERAGE RATES:
The coverage will vary dependant on how much the tile and stone cleaner is diluted. It will also depend on the amount of surface contamination and general condition of the tiled surface.
DIRECTIONS FOR USE:
1) Dilute according to levels of surface dirt and contamination being removed. For best results, mix 1 - 8 capfuls to 5 litres of warm water.
2) Apply the cleaning solution to the soiled area leaving 1 - 2 minutes before mopping or wiping surface clean.
The pH Neutral Tile & Stone Cleaner does not leave streak marks and dries clear. There is no need to rinse it off the surface as this will dilute the effectiveness of the cleaner afterwards.
Important note: Always test the pH Neutral Tile & Stone Cleaner first in an inconspicuous area to see if it is suitable for its intended use.
Q: Is this product safe for pets and chemically sensitive people? Does it contain synthetic perfumes?
A: The ph Neutral Tile & Stone Cleaner leaves a clean lavender scented finish. For full information regarding the chemicals within the product, please refer to the Safety Data Sheet (SDS) which can be found on the downloads section next to the product listing.
Q: Can this tile cleaner be used on Bert and May encaustic tiles? They are going to be positioned in a shower in a hotel room - would this cleaner be ok to use on a daily basis? And can it be used on marble in the same sort of environment? Naturally all surfaces will have been sealed Best wishes Libby Lord
A: Yes, the pH Neutral Tile & Stone Cleaner has been formulated to be used on tiles without causing any harm.
Arrived in good time, cleaner has not resolved the problem that I have (ingrained ageing), however, (I believe) this is not the fault of the product, I feel that I need the stronger solution!
Arrived in good time, product has not resolved the problem that I have (ingrained ageing), however, (I believe) this is not the fault of the product, I feel that I need the stronger solution!
An easy to use cleaner that works well on our slate slab floor. You do not require much so it goes a long way whilst the perfume is pleasant and not overpowering in any way.