Sealer Colour Tints for Imprinted Concrete Sealer (500g or 50g sample)
Highly Concentrated Powder Pigment - Use Sparingly. For use with Imprinted Concrete Sealers (20 colours)
Colour Tints to restore original colour to Imprinted Concrete surfaces.
Add sparingly directly to sealer, until desired colour is achieved (always apply on a small test area first). Agitate regularly during application.
Only recommended to be used in combination with Smartseal MATT finish sealer.
WARNING: Unnecessary use, or too much colour added to sealer can cause peeling or flaking.
Only use with solvent based imprinted concrete sealer to bring back original colouring of driveway or patio.
Colours Available
Q: Hello, Is it fine to use the anti-slip agent with the colour tint & matt sealer too? Also, which tint is darker initially, platinum grey or steel grey?
A: Yes it is fine to use the anti-slip agent with the colour tint & matt sealer. Not much difference between the steel grey colour tint and platinum grey colour tint. The steel grey may be slightly darker but we would suggest getting some samlples to test first.
Q: What is the sf. Coverages of 500g of pigment
A: There is no specific coverage for the colour tints as it really does depend how much colour is required. Some imprinted concrete drives or patios need more colour than others due to the amount of wear and the time in between sealing. Generally one 500g tub is sufficient for two 25L drums of sealer which can cover up to 100sq m each.
Q: Hi, I have just had my concrete newly imprinted/laid, however the after is showing up as 2 completely different shades of grey. Will adding this tint into my sealer change it to 1 consistent colour?
A: This could be the answer. When specific / individual advice is required, it is best to send us pictures through our 'advice' page on our website. Hope that helps.
Very good product
Product seems to be fine up to yet, certainly produces the colour I wanted.
As recommended you need to use the colour tint very sparingly - the longer it is in the sealer solution , the stronger the dye becomes. I don't understand why it is only available in 30g or 500g sizes. In hindsight I only needed 2 x 30g samples for a 50m2 drive.