Grey Concrete Paint | Concrete Driveway Paint | Concrete Patio Paint Grey
(Sample, 5L & 25L) Colour, Seal and Protect Untreated Concrete. Hard-wearing product, suitable for Floors, Parking Areas, Bases and Paths. Ready to apply.
Smartseal Concrete ColourSeal in dark grey is a formulated blend of highly concentrated pigments and hard-wearing acrylic resins, that will transform and protect external concrete surfaces. Superior to a dark grey concrete paint, it provides lasting protection to driveways and patios.
Concrete ColourSeal dark grey is the perfect way to enhance the appearance of concrete bays, paths, bases and parking areas (not to be used on imprinted concrete or previously sealed or painted concrete).
Suitable for Power floated and Screeded concrete surfaces.
Application is simple and easy by roller or brush, with two coats recommended for long term protection.
Concrete ColourSeal's unique formula is UV light and stain resistant. The sealer will soak deep into the porous voids of the concrete, acting as a highly effective dust proofer and concrete hardener. It can be applied on smooth or textured surfaces (coverage rates may be reduced on tamped or rough concrete). Can be used as a more durable alternative to a concrete driveway paint or a dark grey concrete patio paint.
Transforms Plain Concrete
Suitable for Concrete Bays, Paths, Bases and Parking Areas
Recolours and Protects
UV Stable
Colour Fast
Stain Resistant
Average Coverage: 4 - 5mē/litre first coat & 6 - 8mē/litre second coat
Ready to apply straight from the tin
NOT for use on imprinted concrete or previously painted/sealed concrete
PLEASE NOTE: Concrete Colourseal is only for use on untreated or unsealed concrete surfaces.
*Always apply to a test area first and leave for 5-7 days to determine suitability.
PREPARATION:
Fully clean the surface of the concrete using a power washer and drive clean xtreme or patio clean xtreme. Allow to completely dry for a minimum of 72 hours. Apply in temperatures between 12-23 degrees centigrade. Allow 2 hours drying time between coats. Only apply in dry conditions with no rain forecast within 6 hours after application.
APPLICATION:
It is important to thoroughly mix before and during use, ideally with a plasterers paddle. Apply 2 coats by brush or roller (3 coats may be required on older paved surfaces). Add the anti-slip additive if required to improve the slip resistance of the surface. The surface should be fully dry after 24 hours.
COVERAGE:
Average coverage is approx. 4sqm per litre on the 1st coat and 6-8sqm on the 2nd coat.
Q: Hi, I have an area of rough concrete outside the front of a new build garage. Itâs about 2.5 meters wide by 300 mm deep. My roller garage door closes down on it and doesnât seal properly. Would your product seal the are and smooth it? I clearly donât need a large amount. What coverage does it have. Many thanks.
A: The Concrete ColourSeal - DARK GREY will not smooth out the surface it is applied to. It will only replicate the texture of the existing surface.
Q: What's the difference between using Patio against Concrete Colour seal. I have I think Bradstone make flags. Which is best suited Thanks
A: The sealers vary in viscosity. If your patio slabs are quite old and porous, either product should be fine. Samples are available for testing. Hope that helps.
Q: Can this product be used after spraying patio with Spray&Leave product? Thank you
A: Apart from newly laid concrete, the concrete needs to be throughly cleaned with a jet wash combined with a cleaning product before applying the coloured concrete sealer. If not properly cleaned de-lamination or flaking can occur. Hope that helps.